Brake pad self-inspection 3 tricks to see the thickness
Nowadays, a car is not only a simple means of transportation, but also a life partner of many people. Many friends like to play with cars and think about cars after work. There are also some friends who don't know much about cars, but hope to acquire more car knowledge through car experience, and use this knowledge to check their own vehicles. Self-inspection Tips I hope that through the introduction of some simple self-inspection methods within one's ability, car owners can understand vehicle information more timely even if they cannot replace or repair it by themselves. approach to the problem.
1. Look at the thickness
The thickness of a new brake pad is generally around 37.5px, and the thickness will gradually become thinner with continuous friction during use. The professional technicians of the power station suggest that when the thickness of the brake pads is only about 1/3 of the original thickness (about 12.5px) by naked eyes, the car owner should increase the frequency of self-inspection and be ready to replace it at any time. Of course, due to the design of the wheel hub, some models do not have the conditions for naked eye inspection, and the tires need to be disassembled to complete.
There is a raised mark on both sides of each brake pad. The thickness of this mark is about two to three millimeters. This is also the thinnest replacement limit of the brake disc. If the thickness of the brake pad is already parallel to this mark, it must be replaced. Therefore, when the thickness of the brake pads is close to this mark, the owner must observe and prepare at any time. However, it is difficult to observe accurately with the naked eye without removing the tires. As suggested, it is more convenient than self-inspection.
Tips: There is no strict replacement interval for brake pads according to the car environment and driving habits. Generally, replacement should be considered after driving about 60,000 kilometers. When the brake pads are found to be thin by naked eyes, technicians should be asked to check them during maintenance, because there will be errors in naked eyes observations, and professional maintenance stations are more rigorous than naked eyes observations through calipers.
Brake pad self-inspection 3 tricks to see the thickness
Nowadays, a car is not only a simple means of transportation, but also a life partner of many people. Many friends like to play with cars and think about cars after work. There are also some friends who don't know much about cars, but hope to acquire more car knowledge through car experience, and use this knowledge to check their own vehicles. Self-inspection Tips I hope that through the introduction of some simple self-inspection methods within one's ability, car owners can understand vehicle information more timely even if they cannot replace or repair it by themselves. approach to the problem.
1. Look at the thickness
The thickness of a new brake pad is generally around 37.5px, and the thickness will gradually become thinner with continuous friction during use. The professional technicians of the power station suggest that when the thickness of the brake pads is only about 1/3 of the original thickness (about 12.5px) by naked eyes, the car owner should increase the frequency of self-inspection and be ready to replace it at any time. Of course, due to the design of the wheel hub, some models do not have the conditions for naked eye inspection, and the tires need to be disassembled to complete.
There is a raised mark on both sides of each brake pad. The thickness of this mark is about two to three millimeters. This is also the thinnest replacement limit of the brake disc. If the thickness of the brake pad is already parallel to this mark, it must be replaced. Therefore, when the thickness of the brake pads is close to this mark, the owner must observe and prepare at any time. However, it is difficult to observe accurately with the naked eye without removing the tires. As suggested, it is more convenient than self-inspection.
Tips: There is no strict replacement interval for brake pads according to the car environment and driving habits. Generally, replacement should be considered after driving about 60,000 kilometers. When the brake pads are found to be thin by naked eyes, technicians should be asked to check them during maintenance, because there will be errors in naked eyes observations, and professional maintenance stations are more rigorous than naked eyes observations through calipers.
