Grtech has completed the loading and dispatch of a full 20-foot general purpose container carrying a combined consignment of brake linings, brake lining rolls and brake rivets destined for the African market. The shipment brings three complementary friction-product lines into a single container, giving African distributors and fleet-service operators a consolidated supply of finished linings, cut-to-length roll stock and matching fastening components.
The brake linings in the shipment are manufactured in Grtech's non-asbestos formulations, a product family the company has refined over more than two decades of friction-material production. Grtech's brake lining range covers multiple compound designations, allowing the friction level and wear profile to be matched to different duty cycles, from light-truck urban delivery work to sustained heavy-load highway operation.
Brake linings are tested before dispatch, and Grtech backs its truck brake linings with a one-year or 30,000-kilometre assurance period, subject to its standard product-support terms.
The brake lining roll component of the consignment addresses a distinct need in African markets: workshops and rebuilders who reline brake shoes on-site or in small batches benefit from roll stock that can be cut to the required width and length rather than ordering only pre-cut sets. Grtech's rubber-based brake lining rolls are non-asbestos and steel-wire reinforced, with available widths from 30 mm to 200 mm and thicknesses from 4 mm to 30 mm, conforming to GB/T 11834-2000.
For woven roll constructions in the broader industrial friction range, comparable products are supplied with a dynamic coefficient of friction of approximately 0.38 and a rivet holding capacity of 102.0 N/mm² (14,790 psi), with a maximum intermittent operating temperature of 230 °C. These characteristics make the roll format suitable for brake relining on trucks, trailers and industrial machinery where flexibility in sizing is as important as stable friction.

The rivets included in the container are the third link in the relining chain. Brake rivets for friction-lining attachment are typically produced with a 150-degree countersunk head and a semi-tubular hole whose depth is approximately equal to the rivet diameter, following dimensional conventions such as ASME B18.7. The semi-tubular design allows the shank end to roll over and clamp the lining to the brake shoe without inducing the lining damage that can occur with excessive clinching force.
A further practical advantage of the riveted assembly is serviceability: worn linings can be removed and the brake shoe rebuilt by re-riveting new friction material, extending the useful life of the shoe itself. For African workshops operating mixed fleets and rebuilding brake shoes as a routine service, having lining, roll stock and rivets in one shipment simplifies inventory planning and reduces the risk of assembly delays caused by missing fasteners.

The African market dimension of this shipment aligns with a broader pattern in Grtech's export activity. The company's products are already distributed across Europe, the Americas, the Middle East, Southeast Asia and Africa, and its manufacturing operations hold IATF 16949:2016 and E-MARK certifications, with SGS/BV audited supplier status.
#grtech #brakelining #brakeliningroll #rivet #brakepart #frictionmaterial


