Grtech has completed the dispatch of 11 pallets carrying 17,450 sets of GRT-828 clutch facing to an OEM clutch manufacturer. The consignment was loaded and released from Grtech's production facility today, continuing a scheduled OEM supply cadence for the GRT-828 line.
The GRT-828 is a drilled clutch facing built on a composite material body reinforced with acrylic fiber and a high-component copper wire skeleton. Its construction is oriented around three properties that matter directly to an OEM clutch builder: stable friction and wear behaviour across repeated engagement cycles, high resistance to rotational damage at operating speeds, and joint smoothness that translates into predictable clutch take-up. The facing is supplied across a size range from 130 mm to 430 mm, spanning passenger-car and light-commercial clutch disc diameters within a single product family.

GRT-828 test data show a coefficient of friction ranging from 0.47 at 100 °C to 0.38 at 200 °C, returning to 0.38 on cool-down to 100 °C, with wear rates held between 0.04 and 0.10 × 10⁻⁷ cm³/(N·m) across the 100–300 °C band. This profile sits within the window typically specified for OEM-grade clutch facings - a nominal μ around 0.43 with controlled tolerance across temperature - and positions the material for clutch programmes where friction consistency under heat cycling is a governing acceptance criterion.

Rotational burst strength is a gating property for clutch facings because the facing must remain intact at the disc's maximum governed speed. China's national standard for automobile clutch facings, GB/T 5764-2011, sets the minimum burst strength for dry clutch facings (Class 2) at 8,000 r/min at 200 °C. Facings in the GRT-828 class are benchmarked against a higher product-level threshold: ≥12,000 r/min at normal temperature and ≥10,000 r/min at 200 °C on a 200×130 mm test ring. The margin between the standard floor and the product-level figure is the headroom an OEM clutch manufacturer is effectively buying when qualifying a facing for higher-governed-speed applications.

The 11-pallet, 17,450-set consignment is consistent in scale with Grtech established OEM supply pattern. Prior GRT-828 dispatches have included a 47,550-set single shipment and a separate 22,000-set run loaded across 11 pallets. Grtech's clutch-facing manufacturing operates under IATF 16949:2016, and its clutch facings are produced asbestos-free, lead-free, cadmium-free and mercury-free with SGS certification. The company also offers formulation-level OEM/ODM customisation: friction level, wear profile, groove design and dimensions can be adjusted to the clutch manufacturer's validated specification rather than selected from a fixed catalogue. For an OEM clutch builder qualifying a friction supplier, this means GRT-828 can be held to the purchaser's own drawing and performance schedule, with judder and burst data generated against that specification.
#grtech #clutchfacing #frictionmaterial

