Manufacturing process of friction plate
The most commonly used molding method in the production process of friction material products is to shape and solidify the compressed plastic under pressure and heating conditions. After a certain period of time, a friction plate with a specified shape, certain density, hardness and mechanical strength can be obtained. product.
In the production process, the staff must strictly follow the formulation of the product, and whether it is more or less will affect the performance of the product. To adjust the ingredients, it is necessary to set the temperature, time and pressure. This is just a prototype of the friction plate. In order to make the material of the friction plate more stable and heat resistant, we have heat-treated it, and the heating time is as long as More than 6 hours, can continue processing. There are many burrs on the surface of the heat-treated friction plate, we need to grind and cut it, and the final inspection and packaging are carried out.
This is just one of the simplest steps to make a friction plate, but it needs to be checked by the staff layer by layer. As long as there is a little error in the middle, the friction plate will be scrapped. Why is it so strict, because the brake is a safety part produced by the equipment, Whether it is good or bad is the decisive role of the friction plate, and a good friction plate is the protector of people and equipment.
