Do you want to hit the clutch when you hit the brake? The correct method of braking
Under normal circumstances, the point brake is not to step on the clutch, the point brake means to gently step on the brake, and then release, and then repeat this action, slowly you can reduce the speed. When the brake needs to pay attention to, the strength of the brake can not be too heavy, otherwise it may stall.
A situation where you need to hit the brakes
1, the automatic car can directly step on the brake, because the automatic car does not have a clutch pedal.
2, in the process of high-speed driving, or usually when driving, if we are in order to reduce the speed, this time do not need to step on the clutch, you can directly tap the brake.
3, in the corner, we can step on the brake to slow down, if the past curve found that there is no situation, you can release the brake after stepping on the accelerator to drive normally.
Need to step on clutch situation
1, in the corner, we can step on the brake to slow down, if the past curve found that there are obstacles, this time we need to step down the clutch, and then change to low gear when hanging gear.
2, when stopping, step on the brake, reduce the speed, we need to step on the clutch, so as to achieve the purpose of parking.
However, if we encounter an emergency, we need to step on the clutch and brake together, which is to stimulate the ABS system of the car. If we only step on the brake, it may stall, but at this time the car is still in the gliding state and cannot touch the ABS anti-lock braking system, but if the clutch is stepped on at the same time, The connection between the engine and the wheels can be disconnected, at which time the ABS system will be triggered to protect the car and the people on board.
