Do new brake pads need to be broken in?
Brake pads are a very important braking component that protects the safety of people and equipment. But do new brake pads need to be broken in? The answer is yes, the new brake pads have to be run-in in order to achieve the most ...
Brake pads are a very important braking component that protects the safety of people and equipment. But do new brake pads need to be broken in? The answer is yes, the new brake pads must be run-in to achieve the best performance of the brake pads. And how did the new brake pads fit in?
In fact, this is not difficult. Usually, when we buy new equipment or vehicles, we basically do not need to run them in by ourselves. Because the manufacturers have already run in almost the same way during debugging, we often ignore this step, but when we replace new ones After the brake pads, be sure to break in the brake pads:
1. After installing the new brake pads, find a place with good road conditions and few vehicles, accelerate the vehicle to about 100 yards, and then step on the brake moderately to reduce the speed to slow driving, but do not stop suddenly, this is very dangerous.
2. Release the brake pads and let the car drive slowly, cool down the temperature of the brake pads and repeat the previous step, which requires repeated running-in.
3. During this repeated running-in, unless the vehicle has obvious braking vibration, do not brake until the vehicle stops. It takes nearly 100 kilometers of running-in period between the brake pads and the brake disc to achieve the best results.
