Phenomenon: when the car starts, the clutch pedal needs to be lifted very high to barely start; In the process of driving, when the accelerator pedal is pressed, the speed cannot be effectively improved or improved very little; I smelled burning in the car. These are the phenomena of clutch slip.
Causes and solutions:
A. The free travel of clutch pedal is not enough
It can be improved by adjusting the length of the cable or the length of the clutch push rod.
B. The clutch tablet is stained with oil
The clutch piece avoid oil, in the installation also need to pay attention to. If it is stained with oil, it needs to be cleaned. If there is oil leakage, it should be solved at the same time.
C. Ablation of clutch sheet
The clutch piece becomes thinner after long-term use or non-standard use, and it needs to be replaced at this time.
D, the previously mentioned driveline overload
