Clutch separation fault diagnosis and elimination
Fault diagnosis and elimination
1, check the automobile clutch pedal free travel, if the free travel is too large to adjust;
2, for the hydraulic control mechanism to check whether the oil storage tank is insufficient or there is air in the pipeline and necessary elimination;
3, check the height of the inner end of the separation lever, if the separation lever is too low or not in the same plane, then adjust;
4, check whether the driven plate is warped deformation rivet fall off, whether the driven plate axial movement tape.
Clutch does not detach solution
Clutch device or more complex involved, even ordinary people know the cause of the problem and solution, because of the tools and the limitation of professional maintenance skill level, you can't also don't suggest you for repair, DIY replacement filter or twist the screw even at ordinary times, but involves the clutch fault is the first time to professional repair shop for maintenance of good, Don't fool around on Baidu or forums, directly listen to the diagnosis of the master is not better.
