Clutch housing structure design and analysis

Sep 20, 2024

Leave a message

Clutch housing structure design and analysis

The clutch shell has a 4-step disc-shaped structure, as shown in Figure 1. It has an open cylinder-shaped ladder structure, and 16 assembly and installation holes are symmetrical in the center. Flanging and forming make the steel plate material present an unclosed curve-flanging structure of compression and extension.

There are 12 reinforcing bars at the third step of the clutch housing, which are center symmetrical and complex in structure, requiring multiple drawing, precision punching and shaping, and complex stamping production process.

The clutch shell has a maximum outer diameter of 480mm and a drawing depth of 28mm and 18mm respectively. The clutch shell has a multi-step open cylindrical step drawing size with varying circular drawing depth, as shown in Figure 3. Flanging height 47 mm, adopt compression and elongation of the combination of non-closed curve flanging process, parts flanging into wave cylinder shape, forming process is complex.

The part material is SPHE steel plate, which is a kind of hot rolled soft steel plate and steel strip for deep drawing, corresponding to the domestic steel number 08AL, and the material thickness is 7 mm.

Send Inquiry