https://www.chinagrtech.com/brake/Causes of Brake Pad Failure
Brake pads are the most commonly used in our lives. Similarly, there are many different types of brake pads in shape and material, but the effect that needs to be achieved is the same. Brake pads will have different degrees of failure during use, mainly in the following situations:
Brake oil causes industrial brake pad fault lights to light up: brake cylinder, oil pipe oil leakage: brake cylinder and oil pipe oil leakage will cause the brake fluid level in the brake oil tank to be too low, and the brake oil will sound an alarm.
Oil dumping when going uphill: It is no problem to drive on flat ground, but when going uphill or when braking suddenly, the slope is too large, which will cause the oil to pour out, and the liquid level indicator will give a false alarm. This kind of oil only needs to be replenished Brake Fluid.
Wheel fire: This is caused by excessive temperature. After driving downhill for a long time, the temperature of the wheel will easily rise due to the long-term friction between the brake pads and the brake drum. If the temperature is not cooled in time, serious accidents such as wheel fire will easily occur.
Looseness of the brake pads: Let the outer side of the brake pads keep leaning against the brake drum, and the continuous high temperature will be generated during driving, so that the brake pads that originally only move up and down will shake from side to side. Friction occurs in the moving drum, resulting in high temperature phenomena.
