What precautions should be taken when replacing paper-based rubber friction plates?
Friction material is a component material used in power machinery and mechanical equipment that relies on friction to perform braking and transmission functions. Its main function is to absorb or transmit power through friction, so that mechanical equipment can interact with various motor vehicles. Able to work safely and reliably.
Paper-based rubber friction plates belong to the technical field of friction materials and preparation methods thereof, especially motorcycles and preparation methods thereof. We know that due to its porous material structure, wet friction materials rely on the viscous resistance between oil molecules to transmit torque after absorbing a large amount of oil. Therefore, the higher the oil absorption rate, the more stable the dynamic-static friction coefficient, and the more Not easy to burn. However, if the oil absorption rate is too high, the friction coefficient will decrease and the torque transmission capacity will be insufficient.
Paper-based rubber-type friction plates combine the high porosity of paper-based and rubber-type adhesives. Paper-based rubber will be a new friction material that combines the best properties of paper-based and rubber materials, that is, it retains It improves the stability and heat resistance of paper-based friction materials, while retaining the characteristics of rubber cork friction materials with high cold or static friction coefficient and large transmission torque. Therefore, the durability and anti-aging properties of the friction material are improved.
At the same time, it is also a new type of non-asbestos, pollution-free, green and environmentally friendly friction material. In the composition design, synthetic fibers with excellent performance are used to replace traditional asbestos fibers as reinforcing fibers. Based on the design concept of non-asbestosization, first improving the strength of the original paper-based material, and recycling edge materials before hot pressing and curing, the friction material has been non-asbestosized, has high raw material utilization, and has obvious environmental and cost benefits. And during the production process, edge materials can be recycled, saving a lot of high-quality raw materials and reducing costs.
