High Quality Copper And Iron Sinted Clutch Disc For Racing Car Models,size 184mm ,203mm And 215mm

Jan 18, 2024

Leave a message

Clutch disc include iron and copper sinted meterial,used for racing car model
Produced by Grtech group and deliveryed to yiwu warehouse today for loading to Middle East market
#GRTECH #clutchdisc #clutchcover #clutchplate, #clutchpressureplate #clutchassembly #clutchkit #brakelining #brakepads #cvbrakepads #discbrake #brakedisc #cvbrakelining #brakedrum

1

Grtech has formally introduced a high-quality copper-iron sintered clutch disc series for racing applications, available in three diameters: 184 mm, 203 mm and 215 mm. Built around a copper-iron composite sintered friction material, the series is systematically optimized at both material and structural levels for the repeated high-stress engagements, sustained thermal loads and instantaneous high-torque transmission typical of competitive driving, targeting an uncompromised friction solution in the powertrain path for circuit, rally and sprint racing. 

2

Copper-iron sintering is not a simple superposition of copper-based and iron-based friction materials. The iron matrix contributes higher hardness, strength and friction coefficient, enabling the friction layer to withstand greater pressure per unit area and higher instantaneous surface temperatures, while the copper phase offers superior thermal conductivity and a lower wear tendency, helping to rapidly dissipate heat generated at the friction interface during successive engagements and suppress the initiation of local hot spots and thermal cracking.

 

Within this composite matrix framework, Grtech further incorporates nano-ceramic particle reinforcements and molybdenum disulfide additives, holding friction coefficient variation within ±12% even under sustained operating temperatures of up to 350 °C, giving the driver a predictable pedal feel and torque response at braking points and during shifts. 

3

At the structural level, the clutch discs adopt a rigid hub design that suppresses hub deflection under extreme torque loads, ensuring that contact pressure distribution between the friction surface and the pressure plate does not degrade through elastic deformation. The lining is attached to the steel backing via precision brazing; compared with conventional bonding processes, the brazed joint offers stronger delamination resistance under repeated high-stress engagements, reducing the risk of friction lining peel-off. 

4

5

Compared with organic friction materials, the copper-iron sintered friction layer achieves a higher friction coefficient and greater transmittable torque within the same installation envelope, along with higher thermal capacity, markedly improving resistance to heat fade under repeated acceleration and standing-start scenarios.

 

Sintered metal friction discs are also noticeably less sensitive to oil and dirt than organic materials, providing a more gradual degradation path for friction performance in the harsh environments of rally stages or endurance races. In addition, the series targets low rotational inertia: reduced disc inertia supports rapid engine speed rise and fall, making downshift rev-matching and sequential gearbox shift衔接 crisper and cutting parasitic power loss. 

6

With solid expertise in friction material R&D and precision manufacturing, Grtech keeps focusing on high-performance racing transmission components. We are able to offer customized selection guidance based on customers' horsepower level, track conditions and modification plans, as well as tailored bulk solutions. We supply steadily to racing workshops, professional race teams, auto importers and wholesalers worldwide, together with complete datasheets and dedicated technical support. Grtech helps partners deliver robust, durable and high-performance powertrain upgrade solutions for racers.

 

#grtech #clutchdisc #racingcarclutchdisc #clutchassembly #clutchkit 

Send Inquiry