Why is clutch wear so different?
Many people have this confusion, why do I replace the same clutch so often, while others may not need to replace it for a few years, is it because the clutches purchased are all substandard, but they have been replaced so many times, the probability should be Not much. Why is that? Today we will talk about the reasons for frequent clutch replacement.
1. Due to the product's own reasons, the clutch that may be purchased is a substandard product or a third-order product, resulting in frequent replacement.
Second, the reasons for the user.
Improper use
1. Get used to putting your foot on the upper pedal of the clutch, the clutch is continuously stressed and always in working condition.
2. Emergency braking when the clutch is not disengaged, and the force is applied again after braking
3. The gear shift operation and clutch coordination are not good
4. The gear shift is not timely when going uphill, and the engine is about to be turned off before shifting to a lower gear
5. Overloading, especially severe overloading, causes the clutch friction plates to wear too fast.
improper maintenance
1. When replacing the friction plate, the maintenance personnel did not repair the surface of the flywheel and did not eliminate the damage of the surface of the flywheel, resulting in serious damage to the clutch friction plate
2. The quality of the replaced clutch friction plate is poor, and there is a problem with the connection.
