Why do brake pads need to be run in after replacement?
After the new brake pad is replaced, the surface of the brake pad is relatively flat, and the contact surface on the brake disc is very uneven. At this time, there will be the so-called "brake" situation. Therefore, it is necessary to run in a new brake pad, so that the contact area between the brake pad and the brake disc increases, and the braking effect is better.
How do the new brake pads fit in?
After the brake pad is replaced, if the brake feels soft, it is necessary to step on the brake for a few feet to eliminate the gap between the brake pad and the brake disc. Need to run in 200 kilometers in order to achieve the best braking effect, as far as possible to drive to good road conditions less car place run in. The new brake pad run-in method is to try to use points for braking, do not use the brakes before running in. Prone to accidents.
1, gently step on the brake with moderate force braking to reduce the speed to about 10-20 km/h. There's no need to keep your eye on the speedometer, just keep your eyes on the road and make sure you're paying attention.
2. Release the brake and drive for a few kilometers to cool the brake pad temperature slightly. However, do not stop the vehicle. Otherwise, the brake pad material will blend into the brake disc and cause brake vibration.
3. Repeat at least 10 braking cycles.
Brake pads must choose the products of regular manufacturers, poor brake pads will not only affect the braking effect, but also cause damage to the brake disc. If replacing brake pads at a repair shop, be very cautious! In the car brake pad price allowed range, or choose a well-known brand is more reliable.
