What's wrong with the clutch? How to deal with it?
First of all, the clutch is too hard means that when we step on the clutch pedal, we feel very heavy. It is not as good as before or other vehicles can step on the clutch pedal lightly. Most of this situation is caused by the pressure claw spring of the clutch pressure plate hardening, because the separation of bearings needs to press the pressure claw spring on the clutch pressure plate. Press claw spring through the lever principle to make the friction surface of the pressure plate and the clutch plate separated, if the press claw spring becomes hard we need to use greater force than the original to make the clutch normal separation, so at this time will cause the clutch is too hard feeling.
Second, because the power of the clutch order is trampled pedal - driving clutch master cylinder, clutch wheel cylinder, driving clutch fork, drive the clutch release bearing - drive clutch pressure plate pressure claw spring, so have said above to remove the common pressure plate spring pressure claw fault, see more quite again is the clutch master cylinder or pump failure, Because of its quality problems or the use of brake oil (clutch and brake are using brake oil) problems lead to the piston corrosion of the main pump or sub-pump stuck, it will cause compression is more laborious, so as to feel the clutch is very hard (cable drive is to replace the main pump and sub-pump, replace the cable can be).
