Unqualified brake pads will cause driving safety hazards?
1. The shear strength of the brake pad is unqualified, and it is easy to separate or break
During the actual use of the brake pads, under the condition of normal braking torque, the phenomenon of separation or delamination may occur, so that the normal braking effect cannot be achieved, and accidents are likely to occur.
2. Unqualified friction performance will cause brake failure
When the car is going downhill for a long time, due to frequent braking, the temperature of the brake pads will be very high. If the friction coefficient suddenly decreases in this situation, it will lead to brake failure and speed loss, and it is easy to cause an accident. In this test, it was found that the temperature index accepted by many brake pads is lower than the national standard.
3. The product mark of the brake pad is unclear or the information is incomplete
Learned from the General Administration of Quality Supervision, Inspection and Quarantine of the State Administration of Quality Supervision, Inspection and Quarantine that regarding the overall low pass rate of imported brake pads, the General Administration of Quality Supervision, Inspection and Quarantine has once again organized key monitoring and spot checks on the quality of imported brake pads. , severe disciplinary measures will be stopped in accordance with relevant laws and regulations.
