New brake friction plate run-in
New brake pads should be especially careful in the first 400 km: why?
How to improve braking force after updating the friction plate?
Due to the speed, braking force and environmental conditions (such as temperature, air humidity), the brake may make noise during braking. (Try to avoid emergency braking)
New brake friction plate in 400 km need to pay attention to the main points
1, the new brake friction disc, including the new brake disc, in the first 400 kilometers has not achieved a complete braking effect, the matching surface between the brake disc and the brake disc is not very uniform, not often emergency braking, to avoid the brake disc surface wear rough, and even abnormal sound.
2, during the running-in of the new brake disc, the speed is not easy to be too fast, do not accelerate quickly, because during this period the braking force has not reached the maximum, the braking distance will become longer, and must be controlled within the safe speed range.
3, the new brake disc or the new replacement of the brake disc, first of all, in the parking state of the brake pedal to the end, so that the brake friction disc to reach its working state of the corresponding position, in normal driving, also need to improve the brake pedal torque, improve the braking force reduced during the running-in period.
In SUMMARY:
During the running-in period, the brake friction plate can not be emergency braking, in the traffic flow, and traffic flow is very large sections, we must accelerate gently, avoid unnecessary braking, through these cautious driving methods, in order to make the car better running-in, safety performance can be finally guaranteed.
