Little common sense of motorcycle brake pads (2)
With the innovation of technology, the power of motorcycles is getting bigger and bigger, and the speed is getting faster and faster, and the supporting brake system must be updated with the innovation of technology, and the brake pad is the soul of the brake system, it seems especially important. Today we will talk about the common sense of brake pad replacement.
Timing and cycle of replacing brake pads
1. When the brake pads are abnormally worn or tapered.
2. When the thickness of the brake pads is less than 2mm
3. Brake pads are worn to the warning line for replacement
4. The brakes are used without braking force, which means that the brake pads should be replaced.
You should be ready to replace it, although some riders think that a little bit of brake pads is enough. But under the intense control, in fact, such braking force has been affected.
Disc brake system brake pads can be judged by the groove, or taken out from the caliper to check whether the thickness is sufficient; the hub brake system can be judged by the brake rocker arm knob because it is difficult to remove, if the knob can be easily adjusted to the end, and in addition Take the opportunity to change tires to check that the brake pads are still adequate.
