Is clutch used lower or higher? Clutch lift high car to go where do you need to adjust
After using the clutch for a period of time, the joint position of the clutch pedal will become higher and higher. Why does the clutch get higher and higher? The main causes are clutch disc wear, clutch pull wire is too loose, friction disc separation fork wear seriously. The mechanical clutch can be adjusted to recover, while the hydraulic clutch cannot.
The higher the clutch is used
1, clutch disc wear. Manual transmission adopts friction transmission, and its friction medium is the clutch plate. Therefore, after a period of use, the clutch plate will wear and thin, which leads to a longer clutch stroke and a higher clutch joint point.
2. The clutch cable is too loose. For the use of mechanical clutch models, if the clutch pull line is too long, it will lead to the clutch free travel is too long, the working travel is shorter, so the clutch binding point will be significantly higher;
3, friction plate separation fork wear seriously. After the separation fork wear, the pedal will automatically rise a certain stroke, but at this time the clutch plate still can not stick to the friction plate, at this time the driver will raise the clutch height to make it completely fit.
How to adjust the clutch height?
1, mechanical clutch: mechanical clutch mainly through the clutch wire control clutch work, so we only need to adjust the length of the clutch line can control the clutch pedal free stroke and work stroke, debugging is relatively simple;
2, hydraulic clutch: this clutch can not be adjusted, only by replacing the clutch friction plate and friction disc to restore the clutch height. In fact, manual block models appear to accelerate when the friction plate needs to be replaced.
What are the symptoms of clutch wear
1, rapid acceleration produces burning taste. The main reason for this problem is that the friction of the clutch plate is reduced when the clutch is accelerated, which leads to high temperature and peculiar smell.
2. Reduced motivation. Manual models rely on friction transmission, if the clutch friction is not enough, the vehicle's power will be lost;
3. The height of the clutch joint point becomes significantly higher. If the clutch plate is worn thin, the clutch's working distance will undoubtedly be longer, so the driver will need to lift the clutch higher to fully join.
