How brake shoes are handled on ordinary roads
When driving on ordinary roads, it is inevitable to encounter brake shoe failure. So when encountering a problem, everyone should not panic and deal with it with a calm mind. First, control the direction and quickly shift the transmission into first gear (release the clutch quickly at this time). At the same time, pay attention to observation. If you have the conditions, you should change lanes to bypass the obstacles in front; if there are no conditions, you must not force the change. road. If you find that the car is not slowing down enough when in first gear, you can further reduce the speed by continuously pulling and releasing the brake.
If it is a car with automatic brake shoes, you should first consider changing lanes to bypass the obstacle in front. If this does not work, you can pull the gear lever into a low gear (although this will cause great damage to the automatic transmission, life-saving is always the first priority) ), and then continuously pull and release the handbrake to reduce the speed of the vehicle. Do not pull it too tightly to prevent the handbrake cable from being broken. When the vehicle speed is lower than 30km/h, push the gear lever into neutral, then tighten the handbrake to stop the vehicle. Everyone should keep a clear mind and pay attention to safe driving when driving on ordinary roads.
