Generator belt replacement precursor, generator belt is too tight too loose symptoms
The generator belt is too tight and too loose
Too tight: 1, the belt card is more dead, rotation needs more horsepower; 2, will lead to motor axial diameter load, easy to fatigue; 3, affect the life of the belt; 4, easy to cause engine bearing damage.
Too loose: 1, produce skidding phenomenon, and produce abnormal sound; 2, the belt will appear early wear, affecting the service life of the belt; 3. Insufficient charging of the engine to the battery will affect the service life of the battery; 4, engine jitter, insufficient power, high fuel consumption, high water temperature may appear.
Generator belt replacement precursor
1. When the generator belt is in operation, it is issued.
This situation is caused by the engine belt is too loose, or the installation position is not sure, it is best to check the sound of sliding wear in time.
2, the generator belt appears cracking, cracking and peeling phenomenon.
This situation is because the installation position is not uniform force or corrosion, but also because the use of too long time, the engine belt has been aging, hardening.
3, when the use time of the generator belt is nearly 2 years, or when driving 60,000 kilometers.
The service life of an ordinary engine belt is 2 years or 60,000km, so it needs to be replaced when the specified service life is reached. Never wait until it is broken to replace, it is very dangerous.
What happens if the generator belt breaks?
If the generator belt breaks while the car is in motion, the car can lose power momentarily. If the safety distance of the vehicle behind is insufficient, it is easy to have a traffic accident, especially on the highway.
Therefore, in peacetime must often check the car engine belt, generator belt, water pump belt, air conditioning compressor belt, timing belt and other parts, to ensure that all parts of the car are in good working conditions.
JIANGSU GREAT INDUSTRIALS GROUP CORP.LTD.
