Electronic power steering wheel becomes heavy, car steering wheel heavy what is the reason
Electronic power steering wheel weight is mainly due to the lack of lubrication in the direction of the machine, tire pressure is too low, battery power loss, booster failure and lack of tire pressure caused by; In addition, the electronic power of the fuse, line or short circuit should also be eliminated, according to the fault reaction step by step to investigate the cause of its existence.
Car steering wheel disc
1. If the coordination between the rolling bearings and sliding bearings connected to each steering system is too close, the lubrication effect of the bearing will decline, forming the phenomenon of stuck, thus reflecting the performance of the steering wheel;
2. When the pump pressure of the booster pump cannot reach the standard value, there will be a heavy phenomenon when using the steering wheel. Check the flow control valve.
3 steering machine power oil pressure is low, there will be a phenomenon of heavy steering wheel, if it is due to the steering wheel oil pressure caused by heavy, it needs to go to the maintenance shop in time for maintenance;
4. When the car's steering system is mixed with air, not only the steering is heavy, but also there will be noise in the steering process, which needs to be dealt with in time to avoid unnecessary losses after it is caused;
5. The oil return filter in the oil storage tank is easily blocked if it is not maintained for a long time or not replaced in time, which leads to poor power oil circulation and heavy steering wheel.
JIANGSU GREAT INDUSTRIALS GROUP CORP.LTD.
