Common Problems of Brake Friction Plates (2)
Why is there a noise when braking?
The generation of noise during braking is mainly caused by the resonance or mutual interference of the relevant parts of the suspension system. However, due to improper use or deformation of the material of the brake disc, the hardness, porosity, friction characteristics and compression characteristics of the friction plate are unqualified, and the friction plate and the brake disc are damp and rusted (it only takes a few brakes to recover) , The metal wire in the friction plate formula is too hard, the wear degree of the friction plate is alarmed, and the noise or screaming caused by the mechanical friction plate scraper and other reasons.
Why does the newly installed friction plate have a soft braking phenomenon?
After replacing the new friction pads, the brake may be soft. The possible reasons are: the installation of the friction pads is not up to standard, the surface of the brake disc is contaminated and not clean, the brake pipeline is faulty or the brake fluid is insufficient , The exhaust in the brake hydraulic cylinder is incomplete, the brake disc is excessively worn and the surface is uneven, and the quality of the friction plate is unqualified.
