Shift clutch is about fast step fast lift, match the speed and speed of the engine to shift, if necessary, you can use the throttle to increase the speed, do not feel the shift.
Starting semi-linkage, whether starting or reversing, should use clutch to control the speed. The speed is fast in the semi-linkage on the basis of a little clutch to reduce the speed; Slow down a little bit and clutch up the speed.
Decelerate first brake then clutch, want to stop the car smoothly, must use brake and engine brake reasonably. When the speed is relatively high, the brake should be stepped on first, and then the clutch should be stepped on to cut off the engine power when the speed is reduced to below 30km/h.
Finally, after shifting or starting, remove your left foot from the clutch pedal, never keep your foot on the clutch pedal all the time. Otherwise a long time will lead to the separation bearing and clutch friction disc wear.
