Brake pads simple self-test tips to go out and beware of safety(二)
2. Listen to the sound
If you tap the brakes at the same time accompanied by "iron rubbing iron" sound, the brake pads must be replaced immediately. This is because the limit markings on both sides of the brake pads are already rubbing directly against the brake disc.
The limit markings on both sides of the brake pads are already rubbing the brake discs directly, proving that the brake pads have exceeded their limits. In this case, the brake pads should be replaced at the same time as the brake disc.
In this case, when replacing the brake pads, it is necessary to check the brake discs at the same time, when this sound occurs, the brake discs are often damaged.
In this case, even if you replace the brake pads with new ones, the sound will not be eliminated, and in serious cases, you will need to replace the brake discs.
Suggestion: When you hear a sound from the brakes, it is often too late, and the brake discs will be more or less damaged. Brakes
discs are much more expensive than brake pads, so it is recommended that you check your brake pads regularly to avoid damage to the discs.
The brake discs are much more expensive than the brake pads.
3. Feel the strength
When the brake pads become thin, the braking effect will be affected, and you need to press the brake pedal more deeply to achieve the braking effect that can be achieved by lightly pressing the brake pedal.
The braking effect can be achieved by lightly stepping on the brake pedal, and the braking effect is obviously weakened in the first half of the journey.
Many people feel that their brakes become soft and a little bit unable to brake, at this time we need to check to see if the brake pads need to be replaced.
Suggestion: This method is relatively abstract, by feeling may be some bad grasp, so develop - a good self-check habit
It is very important. In addition, lower braking effect will lead to increased consumption of brake fluid, so replace the brake pads at the same time to focus on checking the brake fluid.
So when replacing the brake pads, you should check the brake fluid condition.
