Brake pad shear strength test

Aug 02, 2023

Leave a message

 

Brake pad shear strength test

The definition of brake pad shear strength is: Shear strength is the strength of the friction material and steel back/boot. The stronger the bond strength, the better the bonding process. Therefore, shear strength is the most important technical index for disc brake linings and drum brake shoes.

Test Equipment Requirements: The test equipment must use a compression tester, tensile tester or hydraulically driven head to apply a shear tester. The testing machine should be equipped with a recording device to correctly reflect the shear process and instantaneous shear force changes. The average load rate is 4500±1000N/s, or the head movement speed is 10±1mm/min, which can be used to test the shear strength of various types of discs, drum brakes, brake pads, large discs and motorcycles.

The test sample can be the whole sample, or it can be separated from the whole sample. When the brake pad is tested, the cut surface should be able to cover the entire assembly, or cut a partial cut along the width of the lining.

Test procedure: room temperature test is usually carried out at 23~5 degrees at room temperature. When the user needs to conduct a high temperature test, the sample should be placed at room temperature for 30 minutes, heated evenly to the specified temperature, and then complete the shear test for 30 seconds from the oven sample, the disc temperature is 300±10, the drum temperature is 200± 10.

Place the sample in the corresponding test fixture. Start and apply the load at the specified rate until the sample brake pad is completely severed by the rear plate or shoe. The temperature of the test piece and the shear force of the sample were recorded, and the shear diagram and the corresponding shear area percentage were observed and recorded. Other inspection items shall be carried out according to relevant standards.

Send Inquiry