Analysis of the failure of the friction plate material and how to repair it
Friction plate materials are widely used in the machinery and automobile industries. Faults will inevitably occur during the application of friction plate materials. So, how to troubleshoot friction plate failures?
The back panel will come off. For the occurrence of this phenomenon, there are mainly two situations: one is that the back plate and the friction material have cracks; the other is that the friction material itself has cracks. These two reasons caused the backplane to fall off. Therefore, if you want to solve this problem, do not use too high temperature for related operations, and do not install it in an incorrect way, so that you can effectively avoid the occurrence of the phenomenon that the back plate of the friction plate material falls off.
Braking sluggishness is also a common problem. If the brake is slow, you need to check the spring to see if there is a failure; the improper clearance between the brake friction plate and the brake disc will also affect it, so the distance of the clearance needs to be adjusted accordingly.
The newly installed brake pads will also appear to be soft on the brakes. The main reasons for this phenomenon are: the brake pads are not standard, which requires the replacement of the brake pads; the dirt on the surface of the brake disc is not cleaned in time, which is also a reason, so clean Work to keep.
The material of the friction plate can play a very good role in braking and running. If there is a failure, it should be analyzed in a timely manner.
